站点导航
Index
机器型号
Machine Type
无环压扣机简介
Introduction of Automatic Grommet Press Machine
网站首页
Home Page
样品展示
Sample show
服务指导
Service&Guide
联系我们
Contact us
汇款账号
Trade Payment

铸铁型无环压扣机
Single Grommet Fastening Machine Cast Type

产品概述  机型参数


应用范围
喷绘行业。

销售价格
1101型:150元
1102型:500元


返回



单环式压扣机
Single Grommet Fastening Machine
  我厂技术人员潜心研究,大胆打破传统观念,率先采用了国内独一无二的单环型压扣方式设计,研制成功单环式压扣机,可广泛应用于广告喷绘、包装、装潢行业、以及建筑工程领域中。
   传统上我们往布面压扣眼时,是采用一个公扣环配一个母扣环对向压合的方式铆在布面上,操作过程,要经过上公扣环,同时上母扣环,在将布面放入压模时,经过校准再进行压合,如果校准不到位,或者因进布不慎将扣环刮偏,就都会造成废品。
  本机对传统压扣方式进行创新性设计,压扣时只采用一个公扣环向布面铆扣,不再需要母扣环配套,压扣速度大幅度提高,比传统方式扣式快5倍之多,操作更为简捷方便,熟练操作者每分钟压扣速度可达30个(每小时达1800个),几乎和自动打扣机的打扣速度相当。
  其优点不会产生机械故障,对耗材的选取要求低,不仅可以使用本机特制扣环,也可以使用市面上的制式扣环(4#,5#),对不同型号的扣环,只要简单更换相应冲模即可,且几乎不会产生废品。由于只采用单环,因此能大幅度降低制作成本。所铆的扣眼强度上丝毫不逊于传统方式。由于不存在金属间的接触间隙,因此更不易生锈。体积小,重量轻,方便使用。
  


Developed by the Chun Lei Banner Machine Enterprise, breaking free from the traditional ideas, adopts the pioneered design that to use the single grommet for eyelet making on pieces.
Application: Fix grommets onto pieces such as fabrics, Canvas, banners, posters, Sailcloth, flexible materials, etc. Widely used in Advertisement, Sign, Packing, Construction Industries.
Normally we make the eyelets onto the destination pieces with a couple of male and female grommets. In the operating process, it should be firstly to set onto the pressing die with the male grommet together with the other female one; and it is also need alignment for the pressing operation, when the pieces are fed ready for grommeting; the grommets may be damaged to waste easily by any deviate from the aimming way, also may be scraped in case of any mistake from pieces feeding and unbalanced pressing operation .
The machine has the creative revolution from the traditional grommet fixing method. It needs just one male grommet for fixing, and need no female one any more. So the fixing speed is upto 5 times faster, and the operation is more convenient. One skilled worker can make 30 eyelets per minute(1800 eyelets per hour), and it may cause almost no damage in operation. On account of using the only one grommet, and it can surely reduce the processing cost of all.
It has commonality and feasibility on the consumables and also be portable for convenient use. It can use not only specific grommets but also the common 4# and 5# grommet with the suitable pressing die. The strength of eyelets by this method has the same effect as traditional's. For it has no touch between the metal eyelets, so the eyelets are not easy to rust.

产品参数
Specification
体积:150×150×100(mm)
净重:4.5kg

Volume:200×150×100(mm)
Weight:5kg


.